MHU1200S and MHU1900S pile driving systems
MENCK’s MHU series of hydraulic underwater hammers in the 1200 - 1900 kj energy range are easy to operate and easy to maintain, but easy doesn't mean they lack in features. These top quality systems also maximise energy efficiency and come with many safety aspects.
How Does the MHU Series Work?
Both the MHU1200S and the MHU1900S are part of MENCK’s above and shallow water series. Both are submersible and deliver their blow directly to the pile, eliminating the need for expensive adapters and cushion rings. Energy is transferred directly from the ram to the pile, also eliminating the need for a cushion block.
The double acting hydraulic system produces energy efficiency upwards of 95%. The MHU anvil is designed for maximum energy transfer with built-in vent holes allowing water trapped inside the pile to escape.
Easy Transport, Assembly and Maintenance
The lightest hydraulic pile driving system in its class, the MHU series is designed to minimise its footprint on a working barge. Our clients benefit by reducing the number of add-on´s (pile segments) for inclined jacket piles (less welding = less installation time).
The modular design allows for easy transport, assembly and maintenance. No special tools are necessary; mobilisation can be conducted in even the most remote locations, making your job that much easier.
Key features & Benefits
- Slim design with simple and uncomplicated operator controls
- Compatible with standard MENCK power packs and control systems
- Energy levels are seamlessly adjusted from 10% to 100% of design energy through the MHC 21 hydraulic control system with hammer performance monitored in real time
- Free riding and submersible up to 300 meters
- Quick and easy pile sleeve adaptation for various pile sizes, reducing set-up time thanks to the exchangeable insert system
- Suitable for subsea portable templates such as the StabFrame™
- Quick connect coupling for hydraulic hoses to save time during operation
- Suitable for operation on drilling vessels through moon pool
- Various options available to suit the application including vertical hose connection configurations in order to fit into tight spaces
- Higher energy output with a lower total hammer weight thanks to the double-acting hydraulic drive unit which not only pulls the ram weight up but also pushes it back down
- Lower ceiling clearance for transport and a smaller footprint on deck with offset lifting supports and eccentric pins
- Safety shut-off devices. If the shackle leaves its horizontal resting position, indicating tension on the crane line, the hammer automatically stops. Sensors monitor hammer to pile contact. If there is not proper contact to the pile, the hammer will not operate
- Reduced energy loss with the pressure compensation system. An external compressor fills the area where the hammer meets the pile with air. The system monitors the water level inside the pile sleeve, preventing water blows and associated energy loss
- Environmentally-friendly. A closed loop hydraulic system minimises the risk of oil emission and biodegradable oil is used
MHU 1200S Operational Data*
- Minimum energy: 110 kJ
- Maximum energy - surface: 1200 kJ
- Oil flow at maximum energy: 2400 l/min
- Blow rate at maximum energy: 38 bl/min
- Ram weight : 66 t
- Hammer weight inc. ram: 120 t
MHU 1200S Standard Configuration
- Pile sleeve: 96"
- Total hammer weight dry: 167 t
- Total hammer weight dry w/ballast: 204 t
- Total hammer weight under water: 170 t
- Hammer length w/pile sleeve: 18.9 m
MHU 1900S Operational Data*
- Minimum energy: 190 kJ
- Maximum energy - surface: 1900 kJ
- Oil flow at maximum energy: 3200 l/min
- Blow rate at maximum energy: 32 bl/min
- Ram weight : 95 t
- Hammer weight inc. ram: 158 t
MHU 1900S Standard Configuration
- Pile sleeve: 102"
- Total hammer weight dry: 218 t
- Total hammer weight dry w/ballast: 245 t
- Total hammer weight under water: 198 t
- Hammer length w/pile sleeve: 22.1 m
Complementing the MHU hammers are system components and services such as:
- Hydraulic lines and winches
- On deck power packs (MHP)
- Control systems
- Highly-qualified service technicians Project management and engineering services After-market care - maintenance, spare parts and fleet management